Blue Whale Arts, LLC
Epping, New Hampshire
Epping, New Hampshire
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Copyright (c) 2007 Blue Whale Arts here All Rights Reserved |
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| Metallic Glaze Paints and Patina Oxidizers from Arizona Gourds All Gourd ART Displayed on this page has been created by Bonnie Gibson - Arizona Gourds |
Antler Lid Vessel with copper
metallic glaze finish and
blue-green patina solution. This
gourd is featured on the cover
of "Gourds: Southwestern Gourd
Techniques and Projects from
Simple to Sophisticated" by
Bonnie Gibson
metallic glaze finish and
blue-green patina solution. This
gourd is featured on the cover
of "Gourds: Southwestern Gourd
Techniques and Projects from
Simple to Sophisticated" by
Bonnie Gibson
Green Patina Solution was used
on a band of copper leafing to add
a decorative effect.
on a band of copper leafing to add
a decorative effect.
Dark Bronze Metallic Glaze
paint and blue-green Patina
Solution was used to accent
the carved ripple area.
paint and blue-green Patina
Solution was used to accent
the carved ripple area.
Bronze Metallic
Glaze paint and
Green Patina
Solution was used
to accent the
carved area.
Glaze paint and
Green Patina
Solution was used
to accent the
carved area.
Dark Bronze Metallic Glaze
paint and a combination of
Patina Solutions were used
on this piece.
paint and a combination of
Patina Solutions were used
on this piece.
Copper Metallic Glaze paint
and Green Patina Solution
were used on this gourd.
and Green Patina Solution
were used on this gourd.
| About this product: Unlike metallic colored craft paints, this metallic glaze paint actually contains real metal particles. Developed for use by interior designers to create stunning faux finishes, Metallic Glazes contain more metal than the products found in craft stores and cost less. The water-based latex glaze paints give the painted surface a coating of real copper alloy metal. The surface may be further treated with a patina solution that will age or patina the metal in the paint to various shades of blues, greens, and blue-greens. In addition, the patina solutions will also work on real metal surfaces as well. |
| The metallic finishes and patina solutions have been packaged in handy, 2 ounce craft-sized bottles. |
| How to use Metallic Glaze Paint: Stir or shake the bottle to mix the paint thoroughly before using. Use the metallic paint directly on the surface or on top of a primer for better adhesion and coverage. (*I usually undercoat the area with regular craft paint of a similar color to provide better coverage.) Next, apply the glaze paint in two (or more) thin coats. Patina solutions should be added when the final coat is still wet. Metallic glaze paints may be mixed to create your own custom metallic color. *Because they contain real metal, the glazes will eventually tarnish naturally - but the addition of a patina solution will dramatically change the appearance. How to use Patina Solutions: These products are designed to alter the color and appearance of copper, brass, bronze and any of the metallic glaze paints. The method of application can be manipulated to produce a variety of effects. The solution can be brushed on, sprayed on, splattered on, sponged on, or dripped on. The only thing to avoid is over-application of the solution, as you want at least part of the metallic surface to show through the patination. More than one solution may be added for interesting results. Your results will vary depending on many factors including method of application, environmental conditions and amounts of products. The reaction takes a little time; anywhere from a few minutes to over an hour. Experimentation and a bit of imagination will provide some interesting results. Misting the dried solution with water will reactivate it for further patination. Application of a clear sealer will stop the patination process and provide a protective coat. Clean up and finishing: Clean up is easy - just use soap and water. As a final finish, seal with an matte acrylic sealer or matte spray. (The patina will lose that "dusty" appearance if gloss or satin finishes are applied.) |
| More Tips for using Patina Paints: 1) Be sure you shake the paint to mix it throughly. The paint contains real metal particles that must be dispersed in the solution for best results. Apply at least two coats for the best results. The more metal that is laid down, the more dramatic the end appearance will be after the oxidizing solution is applied. 2) Apply one thin coat of the metallic glaze paint and let that coat dry. It will lose its glossy appearance as it dries. This paint is slow drying but impatient crafters may use a hairdryer to speed things up! Apply a second coat and WHILE IT IS WET, apply the oxidizing solution. You can apply it in many methods including dripping, brushing, sponging, spraying, or splattering. (It looks nice when you leave bits of the metallic paint uncoated or the whole surface will oxidize.) The amount of time it takes to see the final results will vary depending on temperature, humidity and thickness of metal application. Sometimes the best results won't show up until hours later, so don't despair if you don't get the results you desire immediately. Misting the area with water will reactivate the solution - this is effective when the solution dries too quickly in hot, dry climates. (Additional layers of paint may also be added over top if you accidentally apply too much solution and lose all of the metallic effect. I sometimes use a scrap of sponge to blot on some metallic highlights.) 3) Once you are satisfied with the results and the surface is completely dry, apply a finish. I have found that a matte spray finish gives great results and maintains the natural, dusty look of oxidized paint. |